|
|
| |
Installation |
|
| |
|
|
| |
|
 |
| |
The Dura-Line can be attached to the
first anchor post by a recommended
knot. The line should then be run
towards the opposite end of the
vineyard row. Attach a
tensioning device
to the Dura-Line, at a suggested
distance from the end post. Then
Stretch the line 3’ for every 100’
of row length; then release the wire
puller. Dura-Line will then be
properly tensioned. |
| |
|
| |
Recommended force required to
properly stretch the Dura-line 3% or
3 ft per 100 ft of row length: |
| |
|
| |
Dura-Line can be fastened to
intermediate posts with Staples,
Wood Post Clips, J-R Clips or other
means. For long term installations
involving “sharp” metal cross bars
or line posts, plastic protective
shielding is recommended to insulate
the Dura-line from abrasive
contact. |
| |
|
|
|
|
| |
|
|
| |
|
|
| |
|
|
|
|
|
Bayco®
is a registered trademark of Bayer AG |
|
© Dura-Line
© Ag-liner, Inc. 2007-2009 All rights reserved
Web site Design and Maintenance by
DDS Web Design. |
|
Available only through authorized Ag-liner Distributers. |
|
Call for a dealer near you! 1-877-625-6100 • FAX: 724-625-6106 |
|
Ag-liner, Inc. P.O. Box 1139, Mars, PA 16046 |
|
